CV Protocols · Tabletop Lab Kit

J1939 Tabletop Demonstrator

Hands-on SAE J1939 with a real proportional joystick and linear actuator — the CAN backbone of trucks, buses and off-highway machines, on your bench.

  • Real automotive hardware, tabletop scale
  • 5 guided learning outcomes
  • Lab guide, exercises & instructor notes
  • Pre-integrated and tested by ANCIT

What it does

The learner works as a commercial-vehicle body-electronics engineer. A commercial-grade proportional joystick — the same interface used on excavators and telehandlers — broadcasts its position as J1939 PGNs. A 12 V / 24 V linear actuator subscribes to those commands and moves in proportion to the joystick, standing in for a hydraulic cylinder, tailgate or tipper body.

The whole loop — joystick → PGN → ECU → actuator — is visible in real time on a TOSUN CAN analyser. A J1939 instrument-cluster display shows live SPNs (engine speed, torque demand, battery voltage, vehicle speed), and a fault-injection panel lets the instructor raise and clear DTCs using the SPN + FMI model used across commercial-vehicle OEMs.

Who it's for

  • CV ECU developers at truck, bus and off-highway OEMs
  • Body-builder electronics teams
  • Diagnostic-tool developers at Tier-1 suppliers
  • Universities and automotive competency centres

System architecture

How the pieces talk to each other on the bench.

Key hardware

Proportional joystickCAN output, J1939 PGN broadcast, dual-axis Hall effect
Linear actuator12 V / 24 V DC, 200 mm stroke, position feedback
Gateway ECUSmartWheels EV3 — PGN routing and DTC handling
Cluster display7-inch HMI showing live SPNs
CAN analyserTOSUN USB-CAN — trace capture and PGN decode
DTC panelSPN + FMI fault-injection board, 8 configurable faults

Learning outcomes

  1. Decode PGN / SPN frames from a live J1939 network
  2. Configure address claiming and the multi-packet Transport Protocol (BAM)
  3. Inject, monitor and clear diagnostic trouble codes (DM1 / SPN + FMI)
  4. Write a PGN filter script on the TOSUN analyser
  5. Understand bus load, arbitration and priority in a multi-node network

What's in the box

  • Proportional CAN joystick
  • Linear actuator with position feedback
  • SmartWheels EV3 gateway ECU
  • 7-inch cluster display + HMI
  • TOSUN USB-CAN analyser
  • DTC injection panel
  • Automotive-grade harness, power supply and powder-coated tabletop chassis
  • Lab guide, exercise sheets and instructor notes

Works with

Part of the CV Protocols cluster — combine them into a complete lab:

All Tabletop Lab Kits

Bring the J1939 Kit to your lab

Tell us about your lab and we'll send a configuration and quote.

CV Protocols
SDV Architecture
Vehicle Subsystems
ADAS
Networks & Simulation
We reply within one working day. No prices are shared publicly — every lab is configured to your needs.

Thank you!